huwul
Neu angemeldet
- Registriert
- 8 Juli 2014
- Beiträge
- 30
Habe mir Linux Mint 17 Mate installiert bei folgender Hardware:
Pentium 4 @3Ghz
1,5GB DDR-RAM
Geforce 8800 GT
Acer AL1916W (Bildschirm)
Mein Problem ist allerdings, dass meine Bildschirmauflösung nicht erkannt wird. Habe bereits probiert sie manuell hinzuzufügen über die xorg.conf, allerdings hat dies nicht funktioniert. Benutze den Treiber 331.38. Entscheidend ist glaube ich allerdings, dass mein Bildschirm nicht erkannt wird. Unter den Bildschirmeinstellungen wird der Monitor nämlich auch als "Unbekannt" deklariert.
Hatte es bei Mageia 4 ähnlich, allerdings gab es dort die Möglichkeit den Bildschirm manuell nach Hersteller und Modell auszuwählen, wonach ich dann die Auflösung richtig einstellen konnte.
Nun würde ich gerne meine Auflösung (1440x900) irgendwie einstellen können, denn auch unter den nVidia Treibereinstellungen ist dies manuell nicht möglich.
Das sind die Ausgaben von xrandr und cvt 1440 900.
habe auch bereits folgendes probiert:
Und dabei hört es dann auf.
Habe auch mit der xorg.conf Datei probiert allerdings kam dabei nichts heraus und finde nirgends weit und breit jemanden der mir dabei helfen kann...
Pentium 4 @3Ghz
1,5GB DDR-RAM
Geforce 8800 GT
Acer AL1916W (Bildschirm)
Mein Problem ist allerdings, dass meine Bildschirmauflösung nicht erkannt wird. Habe bereits probiert sie manuell hinzuzufügen über die xorg.conf, allerdings hat dies nicht funktioniert. Benutze den Treiber 331.38. Entscheidend ist glaube ich allerdings, dass mein Bildschirm nicht erkannt wird. Unter den Bildschirmeinstellungen wird der Monitor nämlich auch als "Unbekannt" deklariert.
Hatte es bei Mageia 4 ähnlich, allerdings gab es dort die Möglichkeit den Bildschirm manuell nach Hersteller und Modell auszuwählen, wonach ich dann die Auflösung richtig einstellen konnte.
Nun würde ich gerne meine Auflösung (1440x900) irgendwie einstellen können, denn auch unter den nVidia Treibereinstellungen ist dies manuell nicht möglich.
cvt 1440 900 60
# 1440x900 59.89 Hz (CVT 1.30MA) hsync: 55.93 kHz; pclk: 106.50 MHz
Modeline "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync
# 1440x900 59.89 Hz (CVT 1.30MA) hsync: 55.93 kHz; pclk: 106.50 MHz
Modeline "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync
xrandr
Screen 0: minimum 8 x 8, current 1024 x 768, maximum 8192 x 8192
DVI-I-0 connected primary 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1024x768 60.0*+
1360x768 60.0 59.8
1152x864 60.0
800x600 72.2 60.3 56.2
680x384 60.0 59.8
640x480 59.9
512x384 60.0
400x300 72.2
320x240 60.1
DVI-I-1 disconnected (normal left inverted right x axis y axis)
TV-0 disconnected (normal left inverted right x axis y axis)
DVI-I-2 disconnected (normal left inverted right x axis y axis)
DVI-I-3 disconnected (normal left inverted right x axis y axis)
Screen 0: minimum 8 x 8, current 1024 x 768, maximum 8192 x 8192
DVI-I-0 connected primary 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1024x768 60.0*+
1360x768 60.0 59.8
1152x864 60.0
800x600 72.2 60.3 56.2
680x384 60.0 59.8
640x480 59.9
512x384 60.0
400x300 72.2
320x240 60.1
DVI-I-1 disconnected (normal left inverted right x axis y axis)
TV-0 disconnected (normal left inverted right x axis y axis)
DVI-I-2 disconnected (normal left inverted right x axis y axis)
DVI-I-3 disconnected (normal left inverted right x axis y axis)
Das sind die Ausgaben von xrandr und cvt 1440 900.
habe auch bereits folgendes probiert:
xrandr --newmode "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync
xrandr --addmode DVI-I-0 "1440x900_60.00"
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 140 (RANDR)
Minor opcode of failed request: 18 (RRAddOutputMode)
Serial number of failed request: 31
Current serial number in output stream: 32
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 140 (RANDR)
Minor opcode of failed request: 18 (RRAddOutputMode)
Serial number of failed request: 31
Current serial number in output stream: 32
Und dabei hört es dann auf.
Habe auch mit der xorg.conf Datei probiert allerdings kam dabei nichts heraus und finde nirgends weit und breit jemanden der mir dabei helfen kann...