[News] Liteon DG-16D5S LTU2 & Hitachi DL10N LTU2 Boards verfügbar!

[assyriska_ff]

Endlich sind die neuen LTU2 Boards verfügbar, somit ist es wieder möglich alle Laufwerke der Xbox zu flashen.

Preis = 49,95$

After a long, hard development we are happy to finally announce that the new LTU2 PCB is shipping to all major retailers on August 5th. Due to the custom nature of the board we have been able to manufacture at a greatly reduced cost compared to the LTU v1 PCB (which is no longer available to purchase). You can now buy an LTU2 for only $49.95 !




There are two versions of PCB: Liteon DG-16D5S & Hitachi DL10N

You can also expect a new Jungle Flasher and a new LTU2 fw from C4E.

Official Product Description for retailers:

Do you have a faulty Liteon DG-16D5S or Hitachi DLN10N DVD in your Xbox 360? Are you swapping your drive to another console and are unable to program your firmware due to write protection being enabled?

Team Xecuter have designed new versions of LTU2 PCB for both Liteon DG-16D5S & Hitachi DLN10N.

As with the DG-16D4S, the SPI is also locked on these drives (in addition to the firmware being encrypted), so this replacement PCB allows for the user to unlock and re-lock the SPI at will, and offers full ability to write your own firmware to the drive including your own drive key so you are able to replace your DVD drive if it becomes faulty without having to send it away for expensive repairs.

The Liteon DG-16D5S LTU2 & Hitachi DL10N Unlocked Replacement PCB has been manufactured so it is much cheaper than the original LTU PCB - get them while they are available they will be hot sellers !

Fits all versions of Liteon DG-16D5S (Red Liteon Version)
Fits all versions of Hitachi DL10N (Blue Hitachi Version)
Supports the latest LTU2 fw
Easily programmable using the X360USB PRO V1 or V2 (Update to the latest firmware v20.1)
Compatible with professional power adapters such as the X360USB PRO V2, CK3 Pro & CK3 Mini
Requires the latest Jungle Flasher & J-Runner
C4E's new LTU2 (LT Ultimate v2) firmware now allows booting of any Liteon or Hitachi based system without any previous firmware dump (inc the DG-16D5s 1175/1532 and Hitachi 0500/0502 firmwares) – all you need is the DVD Key and FCRT.bin which can be extracted using RGH or DGX methods.
Includes solderless quick install adapter
Includes external SPI unlock/lock switch
Includes external vendor switch
Includes heatsink for drive controller IC
Every board has a unique serial number which can be checked at serial.xecuter.com
Note: Due to how the custom chipset has had to be designed there is no CD-R support.


This device is designed with the primary purpose to aid and/or assist in the repair or replacement of defective hardware. It does not contain any code or any kind of microchip that infringes any intellectual property.

News: TX