Hallo,
ich war gerade dabei Ordner auf meine Festplatte zu erstellen, als sich diese plötzlich beschwerte, dass ich das nicht mehr tun könnte, da sie nun im read-only Modus waere. Dies erschien mir komisch, und daher habe ich sie unmounted, und wollte sie wieder mounten.
Hier liegt nun das Problem, immer wenn ich versuche die Festplatte zu mounten, kommt unter dmesg folgender Fehler: [src=bash]print_req_error: I/O error, dev sda, sector 12288[/src]. Da meine HD mit LUKS verschlüsselt ist, hier der gesamte Vorgang.
Bash-Kommandos:
[src=bash]
$ cryptsetup luksOpen /dev/sda2 crypt_hd
Device /dev/sda2 doesn't exist or access denied.
[/src]
Entsprechender dmesg log:
[src=bash]
[ 845.589455] usb 1-1.3: reset high-speed USB device number 13 using dwc_otg
[ 845.869470] usb 1-1.3: reset high-speed USB device number 13 using dwc_otg
[ 846.050678] usb 1-1.3: device firmware changed
[ 846.055887] usb 1-1.3: USB disconnect, device number 13
[ 846.063227] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 846.069715] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00
[ 846.078283] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x88 88 00 00 00 00 00 00 00 30 00 00 00 00 01 00 00
[ 846.086323] print_req_error: I/O error, dev sda, sector 12288
[ 846.090616] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=0x01 driverbyte=0x00
[ 846.389450] usb 1-1.3: new high-speed USB device number 14 using dwc_otg
[ 846.521648] usb 1-1.3: New USB device found, idVendor=0bc2, idProduct=3322, bcdDevice= 1.00
[ 846.530884] usb 1-1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 846.535710] usb 1-1.3: Product: Expansion Desk
[ 846.540387] usb 1-1.3: Manufacturer: Seagate
[ 846.545130] usb 1-1.3: SerialNumber: 2HCX1XKJ
[ 846.550478] usb 1-1.3: The driver for the USB controller dwc_otg_hcd does not support scatter-gather which is
[ 846.557916] usb 1-1.3: required by the UAS driver. Please try an other USB controller if you wish to use UAS.
[ 846.565067] usb 1-1.3: The driver for the USB controller dwc_otg_hcd does not support scatter-gather which is
[ 846.572616] usb 1-1.3: required by the UAS driver. Please try an other USB controller if you wish to use UAS.
[ 846.580345] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 846.584784] scsi host0: usb-storage 1-1.3:1.0
[ 847.600474] scsi 0:0:0:0: Direct-Access Seagate Expansion Desk 9401 PQ: 0 ANSI: 6
[ 847.611882] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[ 847.617777] sd 0:0:0:0: [sda] 15628053167 512-byte logical blocks: (8.00 TB/7.28 TiB)
[ 847.627000] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 847.685195] sd 0:0:0:0: [sda] Write Protect is off
[ 847.690330] sd 0:0:0:0: [sda] Mode Sense: 4f 00 00 00
[ 848.440135] usb 1-1.3: USB disconnect, device number 14
[ 848.479552] sd 0:0:0:0: [sda] Asking for cache data failed
[ 848.484411] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 848.491004] sd 0:0:0:0: [sda] Read Capacity(16) failed: Result: hostbyte=0x01 driverbyte=0x00
[ 848.500514] sd 0:0:0:0: [sda] Sense not available.
[ 848.504925] sd 0:0:0:0: [sda] Read Capacity(10) failed: Result: hostbyte=0x01 driverbyte=0x00
[ 848.512816] sd 0:0:0:0: [sda] Sense not available.
[ 848.516950] sd 0:0:0:0: [sda] 0 512-byte logical blocks: (0 B/0 B)
[ 848.521015] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 848.525164] sd 0:0:0:0: [sda] Attached SCSI disk
[/src]
Irgendetwas scheint schief zu laufen, ich verstehe aber nicht wirklich was genau.
Hättet ihr eine Idee?
Vielen Dank für jegliche Hilfe!
ich war gerade dabei Ordner auf meine Festplatte zu erstellen, als sich diese plötzlich beschwerte, dass ich das nicht mehr tun könnte, da sie nun im read-only Modus waere. Dies erschien mir komisch, und daher habe ich sie unmounted, und wollte sie wieder mounten.
Hier liegt nun das Problem, immer wenn ich versuche die Festplatte zu mounten, kommt unter dmesg folgender Fehler: [src=bash]print_req_error: I/O error, dev sda, sector 12288[/src]. Da meine HD mit LUKS verschlüsselt ist, hier der gesamte Vorgang.
Bash-Kommandos:
[src=bash]
$ cryptsetup luksOpen /dev/sda2 crypt_hd
Device /dev/sda2 doesn't exist or access denied.
[/src]
Entsprechender dmesg log:
[src=bash]
[ 845.589455] usb 1-1.3: reset high-speed USB device number 13 using dwc_otg
[ 845.869470] usb 1-1.3: reset high-speed USB device number 13 using dwc_otg
[ 846.050678] usb 1-1.3: device firmware changed
[ 846.055887] usb 1-1.3: USB disconnect, device number 13
[ 846.063227] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 846.069715] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00
[ 846.078283] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x88 88 00 00 00 00 00 00 00 30 00 00 00 00 01 00 00
[ 846.086323] print_req_error: I/O error, dev sda, sector 12288
[ 846.090616] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=0x01 driverbyte=0x00
[ 846.389450] usb 1-1.3: new high-speed USB device number 14 using dwc_otg
[ 846.521648] usb 1-1.3: New USB device found, idVendor=0bc2, idProduct=3322, bcdDevice= 1.00
[ 846.530884] usb 1-1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 846.535710] usb 1-1.3: Product: Expansion Desk
[ 846.540387] usb 1-1.3: Manufacturer: Seagate
[ 846.545130] usb 1-1.3: SerialNumber: 2HCX1XKJ
[ 846.550478] usb 1-1.3: The driver for the USB controller dwc_otg_hcd does not support scatter-gather which is
[ 846.557916] usb 1-1.3: required by the UAS driver. Please try an other USB controller if you wish to use UAS.
[ 846.565067] usb 1-1.3: The driver for the USB controller dwc_otg_hcd does not support scatter-gather which is
[ 846.572616] usb 1-1.3: required by the UAS driver. Please try an other USB controller if you wish to use UAS.
[ 846.580345] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 846.584784] scsi host0: usb-storage 1-1.3:1.0
[ 847.600474] scsi 0:0:0:0: Direct-Access Seagate Expansion Desk 9401 PQ: 0 ANSI: 6
[ 847.611882] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[ 847.617777] sd 0:0:0:0: [sda] 15628053167 512-byte logical blocks: (8.00 TB/7.28 TiB)
[ 847.627000] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 847.685195] sd 0:0:0:0: [sda] Write Protect is off
[ 847.690330] sd 0:0:0:0: [sda] Mode Sense: 4f 00 00 00
[ 848.440135] usb 1-1.3: USB disconnect, device number 14
[ 848.479552] sd 0:0:0:0: [sda] Asking for cache data failed
[ 848.484411] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 848.491004] sd 0:0:0:0: [sda] Read Capacity(16) failed: Result: hostbyte=0x01 driverbyte=0x00
[ 848.500514] sd 0:0:0:0: [sda] Sense not available.
[ 848.504925] sd 0:0:0:0: [sda] Read Capacity(10) failed: Result: hostbyte=0x01 driverbyte=0x00
[ 848.512816] sd 0:0:0:0: [sda] Sense not available.
[ 848.516950] sd 0:0:0:0: [sda] 0 512-byte logical blocks: (0 B/0 B)
[ 848.521015] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 848.525164] sd 0:0:0:0: [sda] Attached SCSI disk
[/src]
Irgendetwas scheint schief zu laufen, ich verstehe aber nicht wirklich was genau.
Hättet ihr eine Idee?
Vielen Dank für jegliche Hilfe!