sia
gesperrt
Hi,
Mein Homeserver ist per HDMI an den TV angeschlossen und soll jetzt auch als HTPC mit Kodi dienen.
Nachdem der Start von kodi-standalone via systemd-Service nicht so gut geklappt hatte, dachte ich, ich nutze einfach lightdm.
Also apt install lightdm und den Service gestartet/aktiviert, aber dann kommt nur ein schwarzer Bildschirm und ein Mauszeiger.
Xorg.0.log:
journalctl -b -p5:
journalctl -b -u lightdm:
Woran kann das liegen?
EDIT: Weitere Infos:
[src=bash]# grep "model name" /proc/cpuinfo
model name : Intel(R) Pentium(R) CPU G3240 @ 3.10GHz
model name : Intel(R) Pentium(R) CPU G3240 @ 3.10GHz
# lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
# lsmod | grep i915
i915 1232896 4
drm_kms_helper 155648 1 i915
drm 360448 5 i915,drm_kms_helper
i2c_algo_bit 16384 1 i915
video 40960 1 i915
button 16384 1 i915[/src]
EDIT2: was ich jetzt gemacht habe:
Mein Homeserver ist per HDMI an den TV angeschlossen und soll jetzt auch als HTPC mit Kodi dienen.
Nachdem der Start von kodi-standalone via systemd-Service nicht so gut geklappt hatte, dachte ich, ich nutze einfach lightdm.
Also apt install lightdm und den Service gestartet/aktiviert, aber dann kommt nur ein schwarzer Bildschirm und ein Mauszeiger.
Xorg.0.log:
Code:
X.Org X Server 1.19.2
Release Date: 2017-03-02
[ 1265.634] X Protocol Version 11, Revision 0
[ 1265.634] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 1265.634] Current Operating System: Linux claptrap 4.9.0-3-amd64 #1 SMP Debian 4.9.30-2 (2017-06-12) x86_64
[ 1265.634] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=b7a3cddc-d37b-47ff-ac37-1ac8e7af1e82 ro single
[ 1265.635] Build Date: 03 March 2017 03:14:41PM
[ 1265.635] xorg-server 2:1.19.2-1 (https://www.debian.org/support)
[ 1265.635] Current version of pixman: 0.34.0
[ 1265.635] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1265.635] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1265.635] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 19 14:24:13 2017
[ 1265.636] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1265.636] (==) No Layout section. Using the first Screen section.
[ 1265.636] (==) No screen section available. Using defaults.
[ 1265.636] (**) |-->Screen "Default Screen Section" (0)
[ 1265.636] (**) | |-->Monitor "<default monitor>"
[ 1265.637] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1265.637] (==) Automatically adding devices
[ 1265.637] (==) Automatically enabling devices
[ 1265.637] (==) Automatically adding GPU devices
[ 1265.637] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 1265.639] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 1265.639] Entry deleted from font path.
[ 1265.639] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 1265.639] Entry deleted from font path.
[ 1265.639] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 1265.639] Entry deleted from font path.
[ 1265.639] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 1265.639] Entry deleted from font path.
[ 1265.639] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 1265.639] Entry deleted from font path.
[ 1265.639] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 1265.639] Entry deleted from font path.
[ 1265.639] (==) FontPath set to:
/usr/share/fonts/X11/misc,
built-ins
[ 1265.639] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1265.639] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1265.639] (II) Loader magic: 0x5654a81b3e00
[ 1265.639] (II) Module ABI versions:
[ 1265.639] X.Org ANSI C Emulation: 0.4
[ 1265.639] X.Org Video Driver: 23.0
[ 1265.639] X.Org XInput driver : 24.1
[ 1265.639] X.Org Server Extension : 10.0
[ 1265.639] (++) using VT number 1
[ 1265.641] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 1265.642] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1265.642] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 1265.643] (--) PCI:*(0:0:2:0) 8086:0402:1849:0402 rev 6, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 1265.643] (II) LoadModule: "glx"
[ 1265.644] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1265.647] (II) Module glx: vendor="X.Org Foundation"
[ 1265.647] compiled for 1.19.2, module version = 1.0.0
[ 1265.647] ABI class: X.Org Server Extension, version 10.0
[ 1265.647] (==) Matched modesetting as autoconfigured driver 0
[ 1265.647] (==) Matched fbdev as autoconfigured driver 1
[ 1265.647] (==) Matched vesa as autoconfigured driver 2
[ 1265.647] (==) Assigned the driver to the xf86ConfigLayout
[ 1265.647] (II) LoadModule: "modesetting"
[ 1265.647] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 1265.647] (II) Module modesetting: vendor="X.Org Foundation"
[ 1265.647] compiled for 1.19.2, module version = 1.19.2
[ 1265.647] Module class: X.Org Video Driver
[ 1265.647] ABI class: X.Org Video Driver, version 23.0
[ 1265.647] (II) LoadModule: "fbdev"
[ 1265.648] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 1265.648] (II) Module fbdev: vendor="X.Org Foundation"
[ 1265.648] compiled for 1.19.0, module version = 0.4.4
[ 1265.648] Module class: X.Org Video Driver
[ 1265.648] ABI class: X.Org Video Driver, version 23.0
[ 1265.648] (II) LoadModule: "vesa"
[ 1265.648] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 1265.648] (II) Module vesa: vendor="X.Org Foundation"
[ 1265.648] compiled for 1.19.0, module version = 2.3.4
[ 1265.648] Module class: X.Org Video Driver
[ 1265.648] ABI class: X.Org Video Driver, version 23.0
[ 1265.648] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 1265.648] (II) FBDEV: driver for framebuffer: fbdev
[ 1265.648] (II) VESA: driver for VESA chipsets: vesa
[ 1265.648] (II) modeset(0): using drv /dev/dri/card0
[ 1265.648] (WW) Falling back to old probe method for fbdev
[ 1265.648] (II) Loading sub module "fbdevhw"
[ 1265.648] (II) LoadModule: "fbdevhw"
[ 1265.648] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 1265.649] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 1265.649] compiled for 1.19.2, module version = 0.0.2
[ 1265.649] ABI class: X.Org Video Driver, version 23.0
[ 1265.649] (WW) Falling back to old probe method for vesa
[ 1265.649] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1265.649] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 1265.649] (==) modeset(0): RGB weight 888
[ 1265.649] (==) modeset(0): Default visual is TrueColor
[ 1265.649] (II) Loading sub module "glamoregl"
[ 1265.649] (II) LoadModule: "glamoregl"
[ 1265.649] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 1265.655] (II) Module glamoregl: vendor="X.Org Foundation"
[ 1265.655] compiled for 1.19.2, module version = 1.0.0
[ 1265.655] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1265.655] (II) glamor: OpenGL accelerated X.org driver based.
[ 1265.675] (II) glamor: EGL version 1.4 (DRI2):
[ 1265.682] (II) modeset(0): glamor initialized
[ 1265.683] (II) modeset(0): Output VGA-1 has no monitor section
[ 1265.684] (II) modeset(0): Output HDMI-1 has no monitor section
[ 1265.684] (II) modeset(0): Output DP-1 has no monitor section
[ 1265.684] (II) modeset(0): Output HDMI-2 has no monitor section
[ 1265.710] (II) modeset(0): Output HDMI-3 has no monitor section
[ 1265.711] (II) modeset(0): EDID for output VGA-1
[ 1265.711] (II) modeset(0): EDID for output HDMI-1
[ 1265.711] (II) modeset(0): EDID for output DP-1
[ 1265.712] (II) modeset(0): EDID for output HDMI-2
[ 1265.737] (II) modeset(0): EDID for output HDMI-3
[ 1265.737] (II) modeset(0): Manufacturer: SNY Model: 4803 Serial#: 16843009
[ 1265.737] (II) modeset(0): Year: 2014 Week: 1
[ 1265.737] (II) modeset(0): EDID Version: 1.3
[ 1265.737] (II) modeset(0): Digital Display Input
[ 1265.737] (II) modeset(0): Max Image Size [cm]: horiz.: 93 vert.: 52
[ 1265.737] (II) modeset(0): Gamma: 2.20
[ 1265.737] (II) modeset(0): No DPMS capabilities specified
[ 1265.737] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1265.737] (II) modeset(0): First detailed timing is preferred mode
[ 1265.737] (II) modeset(0): redX: 0.625 redY: 0.340 greenX: 0.280 greenY: 0.595
[ 1265.737] (II) modeset(0): blueX: 0.155 blueY: 0.070 whiteX: 0.283 whiteY: 0.298
[ 1265.737] (II) modeset(0): Supported established timings:
[ 1265.737] (II) modeset(0): 640x480@60Hz
[ 1265.737] (II) modeset(0): 800x600@60Hz
[ 1265.737] (II) modeset(0): 1024x768@60Hz
[ 1265.737] (II) modeset(0): Manufacturer's mask: 0
[ 1265.737] (II) modeset(0): Supported standard timings:
[ 1265.737] (II) modeset(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 1265.737] (II) modeset(0): #1: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 1265.737] (II) modeset(0): Supported detailed timing:
[ 1265.737] (II) modeset(0): clock: 148.5 MHz Image Size: 930 x 523 mm
[ 1265.737] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 1265.737] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 1265.737] (II) modeset(0): Supported detailed timing:
[ 1265.737] (II) modeset(0): clock: 74.2 MHz Image Size: 930 x 523 mm
[ 1265.737] (II) modeset(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 1265.737] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 1265.737] (II) modeset(0): Monitor name: SONY TV
[ 1265.737] (II) modeset(0): Ranges: V min: 48 V max: 62 Hz, H min: 14 H max: 70 kHz, PixClock max 155 MHz
[ 1265.737] (II) modeset(0): Supported detailed timing:
[ 1265.737] (II) modeset(0): clock: 148.5 MHz Image Size: 930 x 523 mm
[ 1265.737] (II) modeset(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 1265.737] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 1265.737] (II) modeset(0): Supported detailed timing:
[ 1265.737] (II) modeset(0): clock: 74.2 MHz Image Size: 930 x 523 mm
[ 1265.737] (II) modeset(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 1265.737] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 1265.737] (II) modeset(0): Supported detailed timing:
[ 1265.738] (II) modeset(0): clock: 74.2 MHz Image Size: 930 x 523 mm
[ 1265.738] (II) modeset(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 1265.738] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 1265.738] (II) modeset(0): Number of EDID sections to follow: 1
[ 1265.738] (II) modeset(0): EDID (in hex):
[ 1265.738] (II) modeset(0): 00ffffffffffff004dd9034801010101
[ 1265.738] (II) modeset(0): 01180103805d34780a0dc9a057479827
[ 1265.738] (II) modeset(0): 12484c2108008180a9c0010101010101
[ 1265.738] (II) modeset(0): 010101010101023a801871382d40582c
[ 1265.738] (II) modeset(0): 4500a20b3200001e011d007251d01e20
[ 1265.738] (II) modeset(0): 6e285500a20b3200001e000000fc0053
[ 1265.738] (II) modeset(0): 4f4e592054560a2020202020000000fd
[ 1265.738] (II) modeset(0): 00303e0e460f000a20202020202001f0
[ 1265.738] (II) modeset(0): 02033bf0531f101405130420223c3e12
[ 1265.738] (II) modeset(0): 1603071115020601260d070715075083
[ 1265.738] (II) modeset(0): 0f000074030c002000b82d2fd00a0140
[ 1265.738] (II) modeset(0): 007f203070809076e200fb023a80d072
[ 1265.738] (II) modeset(0): 382d40102c4580a20b3200001e011d00
[ 1265.738] (II) modeset(0): bc52d01e20b8285540a20b3200001e01
[ 1265.738] (II) modeset(0): 1d80d0721c1620102c2580a20b320000
[ 1265.738] (II) modeset(0): 9e000000000000000000000000000071
[ 1265.738] (--) modeset(0): HDMI max TMDS frequency 225000KHz
[ 1265.738] (II) modeset(0): Printing probed modes for output HDMI-3
[ 1265.738] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 1265.738] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 1265.738] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 1265.738] (II) modeset(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 1265.738] (II) modeset(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 1265.738] (II) modeset(0): Modeline "1920x1080"x30.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
[ 1265.738] (II) modeset(0): Modeline "1920x1080"x24.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 1265.738] (II) modeset(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[ 1265.738] (II) modeset(0): Modeline "1920x1080"x30.0 74.18 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.7 kHz e)
[ 1265.738] (II) modeset(0): Modeline "1920x1080"x24.0 74.18 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 1265.738] (II) modeset(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e)
[ 1265.738] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1265.738] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 1265.738] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 1265.738] (II) modeset(0): Modeline "1280x720"x30.0 74.25 1280 3040 3080 3300 720 725 730 750 +hsync +vsync (22.5 kHz e)
[ 1265.738] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 1265.738] (II) modeset(0): Modeline "1280x720"x30.0 74.18 1280 3040 3080 3300 720 725 730 750 +hsync +vsync (22.5 kHz e)
[ 1265.738] (II) modeset(0): Modeline "1280x720"x24.0 59.40 1280 3040 3080 3300 720 725 730 750 +hsync +vsync (18.0 kHz e)
[ 1265.738] (II) modeset(0): Modeline "1280x720"x24.0 59.34 1280 3040 3080 3300 720 725 730 750 +hsync +vsync (18.0 kHz e)
[ 1265.738] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1265.738] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1265.738] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 1265.738] (II) modeset(0): Modeline "720x576i"x50.0 13.50 720 732 795 864 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 1265.738] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 1265.738] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 1265.738] (II) modeset(0): Modeline "720x480i"x60.0 13.51 720 739 801 858 480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
[ 1265.738] (II) modeset(0): Modeline "720x480i"x59.9 13.50 720 739 801 858 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 1265.738] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1265.738] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1265.738] (II) modeset(0): Output VGA-1 disconnected
[ 1265.738] (II) modeset(0): Output HDMI-1 disconnected
[ 1265.738] (II) modeset(0): Output DP-1 disconnected
[ 1265.738] (II) modeset(0): Output HDMI-2 disconnected
[ 1265.738] (II) modeset(0): Output HDMI-3 connected
[ 1265.738] (II) modeset(0): Using exact sizes for initial modes
[ 1265.738] (II) modeset(0): Output HDMI-3 using initial mode 1920x1080 +0+0
[ 1265.738] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 1265.738] (==) modeset(0): DPI set to (96, 96)
[ 1265.738] (II) Loading sub module "fb"
[ 1265.738] (II) LoadModule: "fb"
[ 1265.738] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1265.739] (II) Module fb: vendor="X.Org Foundation"
[ 1265.739] compiled for 1.19.2, module version = 1.0.0
[ 1265.739] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1265.739] (II) UnloadModule: "fbdev"
[ 1265.739] (II) Unloading fbdev
[ 1265.739] (II) UnloadSubModule: "fbdevhw"
[ 1265.739] (II) Unloading fbdevhw
[ 1265.739] (II) UnloadModule: "vesa"
[ 1265.739] (II) Unloading vesa
[ 1265.739] (==) Depth 24 pixmap format is 32 bpp
[ 1265.807] (==) modeset(0): Backing store enabled
[ 1265.807] (==) modeset(0): Silken mouse enabled
[ 1265.807] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1265.829] (==) modeset(0): DPMS enabled
[ 1265.829] (II) modeset(0): [DRI2] Setup complete
[ 1265.829] (II) modeset(0): [DRI2] DRI driver: i965
[ 1265.829] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 1265.829] (--) RandR disabled
[ 1265.831] (II) SELinux: Disabled on system
[ 1265.835] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 1265.835] (II) AIGLX: enabled GLX_ARB_create_context
[ 1265.835] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 1265.835] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 1265.835] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 1265.835] (II) AIGLX: enabled GLX_SGI_swap_control
[ 1265.835] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 1265.835] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 1265.835] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 1265.835] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 1265.835] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 1265.835] (II) AIGLX: Loaded and initialized i965
[ 1265.835] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1265.837] (II) modeset(0): Damage tracking initialized
[ 1265.837] (II) modeset(0): Setting screen physical size to 508 x 285
[ 1265.865] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 1265.865] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 1265.865] (II) LoadModule: "libinput"
[ 1265.866] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 1265.869] (II) Module libinput: vendor="X.Org Foundation"
[ 1265.869] compiled for 1.19.0, module version = 0.23.0
[ 1265.869] Module class: X.Org XInput Driver
[ 1265.869] ABI class: X.Org XInput driver, version 24.1
[ 1265.869] (II) Using input driver 'libinput' for 'Power Button'
[ 1265.870] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 23 paused 0
[ 1265.870] (**) Power Button: always reports core events
[ 1265.870] (**) Option "Device" "/dev/input/event2"
[ 1265.870] (**) Option "_source" "server/udev"
[ 1265.870] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 1265.870] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 1265.870] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event2"
[ 1265.870] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 1265.870] (**) Option "xkb_model" "pc105"
[ 1265.870] (**) Option "xkb_layout" "de"
[ 1265.882] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 1265.882] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 1265.882] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 1265.882] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 1265.882] (II) Using input driver 'libinput' for 'Video Bus'
[ 1265.883] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 26 paused 0
[ 1265.883] (**) Video Bus: always reports core events
[ 1265.883] (**) Option "Device" "/dev/input/event12"
[ 1265.883] (**) Option "_source" "server/udev"
[ 1265.883] (II) input device 'Video Bus', /dev/input/event12 is tagged by udev as: Keyboard
[ 1265.883] (II) input device 'Video Bus', /dev/input/event12 is a keyboard
[ 1265.883] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15/event12"
[ 1265.883] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 1265.883] (**) Option "xkb_model" "pc105"
[ 1265.883] (**) Option "xkb_layout" "de"
[ 1265.883] (II) input device 'Video Bus', /dev/input/event12 is tagged by udev as: Keyboard
[ 1265.883] (II) input device 'Video Bus', /dev/input/event12 is a keyboard
[ 1265.883] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 1265.883] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 1265.883] (II) Using input driver 'libinput' for 'Power Button'
[ 1265.883] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 27 paused 0
[ 1265.884] (**) Power Button: always reports core events
[ 1265.884] (**) Option "Device" "/dev/input/event1"
[ 1265.884] (**) Option "_source" "server/udev"
[ 1265.884] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 1265.884] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[ 1265.884] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event1"
[ 1265.884] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 1265.884] (**) Option "xkb_model" "pc105"
[ 1265.884] (**) Option "xkb_layout" "de"
[ 1265.884] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 1265.884] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[ 1265.884] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event13)
[ 1265.884] (II) No input driver specified, ignoring this device.
[ 1265.884] (II) This device may have been added with another device file.
[ 1265.884] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event14)
[ 1265.884] (II) No input driver specified, ignoring this device.
[ 1265.884] (II) This device may have been added with another device file.
[ 1265.885] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event15)
[ 1265.885] (II) No input driver specified, ignoring this device.
[ 1265.885] (II) This device may have been added with another device file.
[ 1265.885] (II) config/udev: Adding input device Logitech K400 (/dev/input/event0)
[ 1265.885] (**) Logitech K400: Applying InputClass "libinput pointer catchall"
[ 1265.885] (**) Logitech K400: Applying InputClass "libinput keyboard catchall"
[ 1265.885] (II) Using input driver 'libinput' for 'Logitech K400'
[ 1265.885] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 28 paused 0
[ 1265.885] (**) Logitech K400: always reports core events
[ 1265.885] (**) Option "Device" "/dev/input/event0"
[ 1265.885] (**) Option "_source" "server/udev"
[ 1265.886] (II) input device 'Logitech K400', /dev/input/event0 is tagged by udev as: Keyboard Mouse
[ 1265.886] (II) input device 'Logitech K400', /dev/input/event0 is a pointer caps
[ 1265.886] (II) input device 'Logitech K400', /dev/input/event0 is a keyboard
[ 1265.886] (II) libinput: Logitech K400: needs a virtual subdevice
[ 1265.886] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.3/1-13.3.2/1-13.3.2:1.2/0003:046D:C52B.0003/0003:046D:4024.0004/input/input3/event0"
[ 1265.886] (II) XINPUT: Adding extended input device "Logitech K400" (type: MOUSE, id 9)
[ 1265.886] (**) Option "AccelerationScheme" "none"
[ 1265.886] (**) Logitech K400: (accel) selected scheme none/0
[ 1265.886] (**) Logitech K400: (accel) acceleration factor: 2.000
[ 1265.886] (**) Logitech K400: (accel) acceleration threshold: 4
[ 1265.886] (II) input device 'Logitech K400', /dev/input/event0 is tagged by udev as: Keyboard Mouse
[ 1265.886] (II) input device 'Logitech K400', /dev/input/event0 is a pointer caps
[ 1265.886] (II) input device 'Logitech K400', /dev/input/event0 is a keyboard
[ 1265.886] (II) config/udev: Adding input device Logitech K400 (/dev/input/mouse0)
[ 1265.886] (II) No input driver specified, ignoring this device.
[ 1265.886] (II) This device may have been added with another device file.
[ 1265.886] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event7)
[ 1265.886] (II) No input driver specified, ignoring this device.
[ 1265.886] (II) This device may have been added with another device file.
[ 1265.887] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event8)
[ 1265.887] (II) No input driver specified, ignoring this device.
[ 1265.887] (II) This device may have been added with another device file.
[ 1265.887] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event9)
[ 1265.887] (II) No input driver specified, ignoring this device.
[ 1265.887] (II) This device may have been added with another device file.
[ 1265.887] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event10)
[ 1265.887] (II) No input driver specified, ignoring this device.
[ 1265.887] (II) This device may have been added with another device file.
[ 1265.887] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event11)
[ 1265.887] (II) No input driver specified, ignoring this device.
[ 1265.887] (II) This device may have been added with another device file.
[ 1265.887] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
[ 1265.887] (II) No input driver specified, ignoring this device.
[ 1265.887] (II) This device may have been added with another device file.
[ 1265.887] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event5)
[ 1265.887] (II) No input driver specified, ignoring this device.
[ 1265.887] (II) This device may have been added with another device file.
[ 1265.887] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event6)
[ 1265.887] (II) No input driver specified, ignoring this device.
[ 1265.887] (II) This device may have been added with another device file.
[ 1265.888] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 1265.888] (II) No input driver specified, ignoring this device.
[ 1265.888] (II) This device may have been added with another device file.
[ 1265.896] (**) Logitech K400: Applying InputClass "libinput pointer catchall"
[ 1265.896] (**) Logitech K400: Applying InputClass "libinput keyboard catchall"
[ 1265.896] (II) Using input driver 'libinput' for 'Logitech K400'
[ 1265.896] (II) systemd-logind: returning pre-existing fd for /dev/input/event0 13:64
[ 1265.896] (**) Logitech K400: always reports core events
[ 1265.896] (**) Option "Device" "/dev/input/event0"
[ 1265.896] (**) Option "_source" "_driver/libinput"
[ 1265.896] (II) libinput: Logitech K400: is a virtual subdevice
[ 1265.896] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.3/1-13.3.2/1-13.3.2:1.2/0003:046D:C52B.0003/0003:046D:4024.0004/input/input3/event0"
[ 1265.896] (II) XINPUT: Adding extended input device "Logitech K400" (type: KEYBOARD, id 10)
[ 1265.896] (**) Option "xkb_model" "pc105"
[ 1265.896] (**) Option "xkb_layout" "de"
[ 1282.846] (II) modeset(0): EDID vendor "SNY", prod id 18435
[ 1282.846] (II) modeset(0): Using EDID range info for horizontal sync
[ 1282.846] (II) modeset(0): Using EDID range info for vertical refresh
[ 1282.846] (II) modeset(0): Printing DDC gathered Modelines:
[ 1282.846] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 1282.846] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 1282.846] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 1282.846] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 1282.846] (II) modeset(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 1282.846] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1282.846] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1282.846] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1282.846] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1282.846] (II) modeset(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e)
[ 1282.846] (II) modeset(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 1282.846] (II) modeset(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 1282.846] (II) modeset(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 1282.846] (II) modeset(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 1282.846] (II) modeset(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 1282.846] (II) modeset(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[ 1282.846] (II) modeset(0): Modeline "2880x480"x0.0 108.00 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 1282.846] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 3700 3740 3960 720 725 730 750 +hsync +vsync (18.8 kHz e)
[ 1282.846] (II) modeset(0): Modeline "1920x1080"x0.0 297.00 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (135.0 kHz e)
[ 1282.846] (II) modeset(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz e)
[ 1282.846] (II) modeset(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz e)
[ 1282.846] (II) modeset(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 1282.846] (--) modeset(0): HDMI max TMDS frequency 225000KHz
[ 1292.870] (II) modeset(0): EDID vendor "SNY", prod id 18435
[ 1292.870] (II) modeset(0): Using hsync ranges from config file
[ 1292.870] (II) modeset(0): Using vrefresh ranges from config file
[ 1292.870] (II) modeset(0): Printing DDC gathered Modelines:
[ 1292.870] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 1292.870] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 1292.870] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 1292.870] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 1292.870] (II) modeset(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 1292.870] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1292.870] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1292.870] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1292.870] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1292.870] (II) modeset(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e)
[ 1292.870] (II) modeset(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 1292.870] (II) modeset(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 1292.870] (II) modeset(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 1292.870] (II) modeset(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 1292.870] (II) modeset(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 1292.870] (II) modeset(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[ 1292.870] (II) modeset(0): Modeline "2880x480"x0.0 108.00 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 1292.870] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 3700 3740 3960 720 725 730 750 +hsync +vsync (18.8 kHz e)
[ 1292.870] (II) modeset(0): Modeline "1920x1080"x0.0 297.00 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (135.0 kHz e)
[ 1292.870] (II) modeset(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz e)
[ 1292.870] (II) modeset(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz e)
[ 1292.870] (II) modeset(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 1292.870] (--) modeset(0): HDMI max TMDS frequency 225000KHzjournalctl -b -p5:
Code:
-- Logs begin at Sun 2017-06-18 19:24:52 CEST, end at Mon 2017-06-19 15:05:42 CEST. --
Jun 19 14:03:40 server kernel: Linux version 4.9.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2 (2017-06-12)
Jun 19 14:03:40 server kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=b7a3cddc-d37b-47ff-ac37-1ac8e7af1e82 ro single
Jun 19 14:03:40 server kernel: ------------[ cut here ]------------
Jun 19 14:03:40 server kernel: WARNING: CPU: 0 PID: 0 at /build/linux-FT3UnK/linux-4.9.30/drivers/iommu/dmar.c:844 warn_invalid_dmar.part.8+0x71/0x80
Jun 19 14:03:40 server kernel: Your BIOS is broken; DMAR reported at address 0!
BIOS vendor: American Megatrends Inc.; Ver: P2.50; Product Version: To Be Filled By O.E.M.
Jun 19 14:03:40 server kernel: Modules linked in:
Jun 19 14:03:40 server kernel: CPU: 0 PID: 0 Comm: swapper Not tainted 4.9.0-3-amd64 #1 Debian 4.9.30-2
Jun 19 14:03:40 server kernel: Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z87E-ITX, BIOS P2.50 07/11/2014
Jun 19 14:03:40 server kernel: 0000000000000000 ffffffff9df28634 ffffffff9e803dd8 0000000000000000
Jun 19 14:03:40 server kernel: ffffffff9dc76eae 0000000000000000 ffffffff9e803e30 ffffffff9eb2d01c
Jun 19 14:03:40 server kernel: ffffffff9eb2d060 ffffffff9e803ed8 00000000b6e92d8e ffffffff9dc76fa7
Jun 19 14:03:40 server kernel: Call Trace:
Jun 19 14:03:40 server kernel: [<ffffffff9df28634>] ? dump_stack+0x5c/0x78
Jun 19 14:03:40 server kernel: [<ffffffff9dc76eae>] ? __warn+0xbe/0xe0
Jun 19 14:03:40 server kernel: [<ffffffff9dc76fa7>] ? warn_slowpath_fmt_taint+0x57/0x70
Jun 19 14:03:40 server kernel: [<ffffffff9e96b755>] ? __early_ioremap+0x13d/0x1b9
Jun 19 14:03:40 server kernel: [<ffffffff9e05f881>] ? warn_invalid_dmar.part.8+0x71/0x80
Jun 19 14:03:40 server kernel: [<ffffffff9e1fcbf9>] ? dmar_validate_one_drhd+0x99/0xd0
Jun 19 14:03:40 server kernel: [<ffffffff9e05f484>] ? dmar_walk_remapping_entries+0x74/0x180
Jun 19 14:03:40 server kernel: [<ffffffff9e981d44>] ? detect_intel_iommu+0x5b/0xf0
Jun 19 14:03:40 server kernel: [<ffffffff9e1fcb60>] ? xen_swiotlb_init+0x4d0/0x4d0
Jun 19 14:03:40 server kernel: [<ffffffff9e945d3d>] ? pci_iommu_alloc+0x4c/0x67
Jun 19 14:03:40 server kernel: [<ffffffff9e95468d>] ? mem_init+0x11/0x93
Jun 19 14:03:40 server kernel: [<ffffffff9e938d3b>] ? start_kernel+0x227/0x463
Jun 19 14:03:40 server kernel: [<ffffffff9e938120>] ? early_idt_handler_array+0x120/0x120
Jun 19 14:03:40 server kernel: [<ffffffff9e938408>] ? x86_64_start_kernel+0x14c/0x170
Jun 19 14:03:40 server kernel: ---[ end trace e7f280380ba9043e ]---
Jun 19 14:03:40 server kernel: pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
Jun 19 14:03:40 server kernel: ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
Jun 19 14:03:40 server kernel: VFS: Disk quotas dquot_6.6.0
Jun 19 14:03:40 server kernel: audit: type=2000 audit(1497873788.508:1): initialized
Jun 19 14:03:40 server kernel: random: systemd-udevd: uninitialized urandom read (16 bytes read)
Jun 19 14:03:40 server kernel: random: systemd-udevd: uninitialized urandom read (16 bytes read)
Jun 19 14:03:40 server kernel: random: systemd-udevd: uninitialized urandom read (16 bytes read)
Jun 19 14:03:40 server kernel: random: udevadm: uninitialized urandom read (16 bytes read)
Jun 19 14:03:40 server kernel: random: udevadm: uninitialized urandom read (16 bytes read)
Jun 19 14:03:40 server kernel: random: udevadm: uninitialized urandom read (16 bytes read)
Jun 19 14:03:40 server kernel: random: udevadm: uninitialized urandom read (16 bytes read)
Jun 19 14:03:40 server kernel: random: udevadm: uninitialized urandom read (16 bytes read)
Jun 19 14:03:40 server kernel: random: udevadm: uninitialized urandom read (16 bytes read)
Jun 19 14:03:40 server kernel: random: udevadm: uninitialized urandom read (16 bytes read)
Jun 19 14:03:40 server kernel: SCSI subsystem initialized
Jun 19 14:03:40 server kernel: scsi 0:0:0:0: Direct-Access ATA WDC WD40EFRX-68W 0A82 PQ: 0 ANSI: 5
Jun 19 14:03:40 server kernel: scsi 1:0:0:0: Direct-Access ATA WDC WD40EFRX-68W 0A80 PQ: 0 ANSI: 5
Jun 19 14:03:40 server kernel: scsi 2:0:0:0: Direct-Access ATA WDC WD40EFRX-68W 0A82 PQ: 0 ANSI: 5
Jun 19 14:03:40 server kernel: scsi 3:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC45 PQ: 0 ANSI: 5
Jun 19 14:03:40 server kernel: scsi 4:0:0:0: Direct-Access ATA KINGSTON SHFS37A BBF0 PQ: 0 ANSI: 5
Jun 19 14:03:40 server kernel: sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
Jun 19 14:03:40 server kernel: sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
Jun 19 14:03:40 server kernel: sd 3:0:0:0: [sdd] 4096-byte physical blocks
Jun 19 14:03:40 server kernel: sd 4:0:0:0: [sde] 468862128 512-byte logical blocks: (240 GB/224 GiB)
Jun 19 14:03:40 server kernel: sd 2:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
Jun 19 14:03:40 server kernel: sd 2:0:0:0: [sdc] 4096-byte physical blocks
Jun 19 14:03:40 server kernel: sd 2:0:0:0: [sdc] Write Protect is off
Jun 19 14:03:40 server kernel: sd 3:0:0:0: [sdd] Write Protect is off
Jun 19 14:03:40 server kernel: sd 4:0:0:0: [sde] Write Protect is off
Jun 19 14:03:40 server kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 19 14:03:40 server kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 19 14:03:40 server kernel: sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 19 14:03:40 server kernel: sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
Jun 19 14:03:40 server kernel: sd 1:0:0:0: [sdb] 4096-byte physical blocks
Jun 19 14:03:40 server kernel: sd 1:0:0:0: [sdb] Write Protect is off
Jun 19 14:03:40 server kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 19 14:03:40 server kernel: sd 0:0:0:0: [sda] 4096-byte physical blocks
Jun 19 14:03:40 server kernel: sd 0:0:0:0: [sda] Write Protect is off
Jun 19 14:03:40 server kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 19 14:03:40 server kernel: sd 4:0:0:0: [sde] Attached SCSI disk
Jun 19 14:03:40 server kernel: sd 2:0:0:0: [sdc] Attached SCSI disk
Jun 19 14:03:40 server kernel: sd 1:0:0:0: [sdb] Attached SCSI disk
Jun 19 14:03:40 server kernel: random: fast init done
Jun 19 14:03:40 server kernel: sd 3:0:0:0: [sdd] Attached SCSI disk
Jun 19 14:03:40 server kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Jun 19 14:03:40 server kernel: random: crng init done
Jun 19 14:03:40 server kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jun 19 14:03:40 server kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Jun 19 14:03:40 server kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0
Jun 19 14:03:40 server kernel: sd 3:0:0:0: Attached scsi generic sg3 type 0
Jun 19 14:03:40 server kernel: sd 4:0:0:0: Attached scsi generic sg4 type 0
Jun 19 14:03:40 server kernel: bluetooth hci0: firmware: failed to load brcm/BCM20702A1-13d3-3404.hcd (-2)
Jun 19 14:03:40 server kernel: bluetooth hci0: Direct firmware load for brcm/BCM20702A1-13d3-3404.hcd failed with error -2
Jun 19 14:03:40 server kernel: bcma: Unsupported SPROM revision: 11
Jun 19 14:03:40 server kernel: bcma: bus0: Invalid SPROM read from the PCIe card, trying to use fallback SPROM
Jun 19 14:03:40 server kernel: bcma: bus0: Using fallback SPROM failed (err -2)
Jun 19 14:03:40 server kernel: bcma: bus0: No SPROM available
Jun 19 14:03:40 server kernel: b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 12, Type 11 (AC), Revision 1)
Jun 19 14:03:40 server kernel: b43: probe of bcma0:1 failed with error -95
Jun 19 14:03:46 server kernel: BTRFS alert (device sdc1): btrfs RAID5/6 is EXPERIMENTAL and has known data-loss bugs
Jun 19 14:22:50 server sudo[797]: root : TTY=tty1 ; PWD=/tmp ; USER=root ; COMMAND=/usr/bin/apt update
Jun 19 14:22:51 server sudo[805]: root : TTY=tty1 ; PWD=/tmp ; USER=root ; COMMAND=/usr/bin/apt upgrade
Jun 19 14:22:51 server sudo[809]: root : TTY=tty1 ; PWD=/tmp ; USER=root ; COMMAND=/usr/bin/apt dist-upgrade
Jun 19 14:23:29 server sudo[817]: root : TTY=tty1 ; PWD=/etc/apt ; USER=root ; COMMAND=/usr/bin/apt update
Jun 19 14:23:30 server sudo[941]: root : TTY=tty1 ; PWD=/etc/apt ; USER=root ; COMMAND=/usr/bin/apt upgrade
Jun 19 14:23:30 server sudo[945]: root : TTY=tty1 ; PWD=/etc/apt ; USER=root ; COMMAND=/usr/bin/apt dist-upgrade
Jun 19 14:23:57 server dbus[986]: [system] Successfully activated service 'org.freedesktop.systemd1'
Jun 19 14:23:57 server dbus[986]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service'
Jun 19 14:23:57 server dbus[986]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Jun 19 14:23:58 server systemd[1]: smbd.service: Supervising process 1423 which is not our child. We'll most likely not notice when it exits.
Jun 19 14:24:30 server kernel: drm/i915: Resetting chip after gpu hang
Jun 19 14:24:40 server kernel: drm/i915: Resetting chip after gpu hang
Jun 19 14:57:02 server kernel: Suspending console(s) (use no_console_suspend to debug)
Jun 19 14:57:02 server kernel: sd 4:0:0:0: [sde] Synchronizing SCSI cache
Jun 19 14:57:02 server kernel: sd 3:0:0:0: [sdd] Synchronizing SCSI cache
Jun 19 14:57:02 server kernel: sd 4:0:0:0: [sde] Stopping disk
Jun 19 14:57:02 server kernel: sd 2:0:0:0: [sdc] Synchronizing SCSI cache
Jun 19 14:57:02 server kernel: sd 1:0:0:0: [sdb] Synchronizing SCSI cache
Jun 19 14:57:02 server kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Jun 19 14:57:02 server kernel: sd 0:0:0:0: [sda] Stopping disk
Jun 19 14:57:02 server kernel: sd 1:0:0:0: [sdb] Stopping disk
Jun 19 14:57:02 server kernel: sd 2:0:0:0: [sdc] Stopping disk
Jun 19 14:57:02 server kernel: sd 3:0:0:0: [sdd] Stopping disk
Jun 19 14:57:02 server kernel: Broke affinity for irq 9
Jun 19 14:57:02 server kernel: Broke affinity for irq 23
Jun 19 14:57:02 server kernel: Broke affinity for irq 24
Jun 19 14:57:02 server kernel: Broke affinity for irq 25
Jun 19 14:57:02 server kernel: Broke affinity for irq 29
Jun 19 14:57:02 server kernel: cache: parent cpu1 should not be sleeping
Jun 19 14:57:02 server kernel: sd 0:0:0:0: [sda] Starting disk
Jun 19 14:57:02 server kernel: sd 1:0:0:0: [sdb] Starting disk
Jun 19 14:57:02 server kernel: sd 2:0:0:0: [sdc] Starting disk
Jun 19 14:57:02 server kernel: sd 3:0:0:0: [sdd] Starting disk
Jun 19 14:57:02 server kernel: sd 4:0:0:0: [sde] Starting disk
Jun 19 14:57:02 server kernel: usb 3-1.5:1.0: rebind failed: -517
Jun 19 14:57:02 server kernel: usb 3-1.5:1.1: rebind failed: -517
Jun 19 14:57:02 server kernel: done.
Jun 19 14:57:02 server kernel: bluetooth hci0: firmware: failed to load brcm/BCM20702A1-13d3-3404.hcd (-2)
Jun 19 14:57:02 server kernel: bluetooth hci0: Direct firmware load for brcm/BCM20702A1-13d3-3404.hcd failed with error -2
Jun 19 14:57:07 server kernel: ata3: link is slow to respond, please be patient (ready=0)
Jun 19 14:57:07 server kernel: ata2: link is slow to respond, please be patient (ready=0)
Jun 19 14:57:07 server kernel: ata4: link is slow to respond, please be patient (ready=0)
Jun 19 14:57:07 server kernel: ata1: link is slow to respond, please be patient (ready=0)
Jun 19 14:57:12 server kernel: ata2: COMRESET failed (errno=-16)
Jun 19 14:57:12 server kernel: ata1: COMRESET failed (errno=-16)
Jun 19 14:57:12 server kernel: ata3: COMRESET failed (errno=-16)
Jun 19 14:57:12 server kernel: ata4: COMRESET failed (errno=-16)journalctl -b -u lightdm:
Code:
Jun 19 13:53:21 claptrap systemd[1]: Starting Light Display Manager...
Jun 19 13:53:21 claptrap systemd[1]: Started Light Display Manager.
Jun 19 13:53:21 claptrap lightdm[1150]: pam_unix(lightdm-greeter:session): session opened for user lightdm by (uid=0)Woran kann das liegen?
EDIT: Weitere Infos:
[src=bash]# grep "model name" /proc/cpuinfo
model name : Intel(R) Pentium(R) CPU G3240 @ 3.10GHz
model name : Intel(R) Pentium(R) CPU G3240 @ 3.10GHz
# lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
# lsmod | grep i915
i915 1232896 4
drm_kms_helper 155648 1 i915
drm 360448 5 i915,drm_kms_helper
i2c_algo_bit 16384 1 i915
video 40960 1 i915
button 16384 1 i915[/src]
EDIT2: was ich jetzt gemacht habe:
- initramfs neu erstellt
- xserver-xorg neu installiert
- debsums -sa drüber laufen lassen (alles ok)
- HPET im UEFI deaktiviert
- gdm3 getestet (funktioniert nicht)
Zuletzt bearbeitet:
